Foilcraft Junior Hot Foil Stamping Machine

Price Guide (RRP):

GBP: £850.00+VAT - 
USD: $1020.00
AUD: $1530.00
EUR: €960.00

These are guide prices only and exclude shipping charges which can be advised on request.

Foilcraft Junior is our smallest hot foil stamping machine with a maximum print area of 4"x1.25".   Within this print area, it is possible to print upto 3 lines of type or a die as large as 4"x1.25".

Therefore, if you are looking to personalise leather products, then this machine is adequate for most tasks. For a larger printer area, please look at our Foilcraft 4x3.

 

No type is supplied with this machine, but it is available as an optional extra. Please click here for details.
 

Machine Features:

Maximum Print Area: 4" width x 1.25" height
(approximately 100mm width x 32mm height)

Print Reach: The heat platen extends the chase to approx 5.5" from the rear of the machine leaving plenty of space to position your item.

Small Footspace:
27cm x 40.5cm x 25.5cm Machine Weight (unboxed): 12kg
Allows you to fit the machine on most desktops or workstands and fully portable.

Height adjustable:
Load products up to 2" Thickness (approx. 5cm).

Print Bed Size: 14" x 10" (Approx 35cm x 25cm)
With open access from the front and sides of the machine, this allows easy positioning of your products.

Temperature Contoller:
300W Analogue controller with thermostat regulator.

All our machines are CE approved and available in either 110v or 220v, so can be used Worldwide.

Proudly Designed in Great Britain.

1. FoilCraft Junior Manual hot foil printing machine with built-in Type   Holding Chase (British Design)
2. 4”x1.25” Die holding block with handle
3.  Die bonding tape (25mm x 1 metre in length)
4.  Spacing furniture
5.  Piece of Presspahn backing substrate (15cm x 13cm)
6. Piece of Rubber Cloth backing substrate (15cm x 10.5cm)
7. Pair of 1.5mm thick magnetic guides
8. Pair of 6mm thick magnetic guides
9. Tool kit
10. Instruction manual 
    (based on Foilcraft 4x3 - Junior works in the same way)
11. Training DVD (2 Hours and 30 Minutes) 
12. 12 Months warranty (back to base)
     

 

PLUS FREE ITEMS WORTH £35.00
1 x Roll of standard metallic gold foil
20 x Blank business card size cards for you to practice with
1 x Horizontal gauge bar
1 x Pair of heat protective gloves

Brass Type/Letters

If you are looking to print onto soft or slightly textured leather, we would recommend using our brass type which is deeper etched and which may help to prevent mistakes or misprints. Please click here for details and refer to the second image which will show you the difference between metal type and brass type. Once on the above page, please explore other links to view our PDF Catalogue.

 

Please Note: This machine is sent by Courier Service only due to its weight - please do not change this option at checkout. Thank you.